Conrad Liebherr LG 1750 SX3 MAMMOET

Mammoet has a very extensive fleet of equipment in which there are around 10 of the Liebherr LG 1750 cranes. On which several SX3 kits have been added in the past couple of years. The unique features of this crane are, amongst others, a mobile undercarriage. This mobile undercarriage forms the basis for the upper carriage with lattice boom. The upper carriage derives straight from Liebherr's crawler crane LR 1750. The fact that the LG 1750 is designed with mobile undercarriage, makes this crane truly mobile and therefore very suitable for work in tight civil projects and for work on wind farms. For the last decade, Mammoet has used the LG 1750's in its fleet extensively for work on wind farms all around the world. The Liebherr LG 1750 SX3 has set the standard for rapidly building these wind farms. The dedication from Liebherr towards innovation has led to continuous upgrades to the LG 1750, such as the SX3 boom configuration, leading to increased lifting capacity and increased hoisting height. The SX3 configuration would replace the traditional 3M wide boom sections with three 6 meter wide, 14M long sections and four 3,5 meter wide and 14meter long sections.

The LG 1750 SX3 has some unique features, knowing:

- 750 metric tonne capacity
- Max. hoist height of 193 metre
- Max. radius of 136 metre
- 8 Cylinder dieselengine for propulsion of the undercarriage with 680hp (505KW)
- 8 Cylinder dieselengine powering the crane with 610hp (455 KW)
- Easy to transport. All transports weigh below 45 metric tonne and have a max. width of 3,5 metre.

The long awaited scale model of the Mammoet LG 1750 SX3 will finally be produced in limited quantities by the German scale model manufacturer Conrad. You'll now be able to add this unique piece of equipment to your own Mammoet fleet. The Mammoet LG 1750 will be offered as the most complete kit ever, offering a large amount of new and unique features!

This means that the Mammoet LG 1750 SX3 will be offered with:

- 3x SX3 boom pieces of 6 meter wide
- 4x SX boom pieces of 3.5 meter wide
- F2 fixed fly jib
- HS windmill jib
- Derrick mast (14 meter and 10.5 meter)
- Luffing Jib
- Floating (detachable) ballast tray.

This means the crane can be built in a range of configurations, knowing:

- SX3D4F2B
- SW - Heavy main boom + Luffing fly jib.
- SD SDB - Heavy main boom, Derrick, Suspended ballast.
- SDWB - Heavy main boom, Luffing fly jib, Derrick and suspended ballast.